WPA Encryption WPA modeThe 'WPA + WPA2' setting automatically uses the WPA mode most suitable for your connections. In some cases, however, it may be necessary to set a specific WPA mode for the wireless devices used and switch to 'WPA2 (CCMP)'. WLAN key. Enter in this field the network key used to secure radio connections. The network key must be between 8 and 63 characters in length. For reasons of security the network key should always be at least 20 characters long. In assigning a password, remember also to comply with the.
Click the 'Apply' button to save your settings.The 'Settings for WLAN Security' window opens. All information required for the wireless LAN settings in the wireless devices is summarized here. You can print out these settings.The network key assigned here must also be entered in the wirless LAN settings of the wireless adapter. Enable AVM Stick & SurfEnable this setting if you would like to use Stick & Surf technology to automatically transmit the security settings of the wireless network to the FRITZ!WLAN USB Stick.Disable this setting as soon as you have completed the automatic transmission or when it is no longer needed. Note:The following settings are not valid for wireless devices on the wireless guest access. The wireless devices displayed may communicate with each otherThis setting defines whether or not the wireless devices are allowed to communicate with each other. Wireless LAN Access ControlShows the wireless devices which are currently connected or have been connected with the FRITZ!Box or which the FRITZ!Box knows from attempted connections.
Crack Wpa Fritz Box Key
Allow all new wireless devicesWith this option all wireless devices are allowed to register with the FRITZ!Box with the appropriate registration data. Do not allow any new wireless devicesWith this option registration is permitted only for those wireless devices which previously were connected with the FRITZ!Box via wireless LAN.However, this setting alone does not provide sufficient protection from undesired access. This is why you should always use the encryption methods on the 'Wireless / Security' page to protect your wireless LAN connections.Add Wireless DeviceIf you have restricted access to the known wireless devices but would still like to permit a new wireless device, click the 'Add Wireless Device' button and enter the MAC address of the new wireless device.
Provided by:NAMEaircrack-ng - a 802.11 WEP / WPA-PSK key crackerSYNOPSIS aircrack-ng options DESCRIPTION aircrack-ng is an 802.11 WEP and WPA/WPA2-PSK key cracking program.It can recover the WEP key once enough encrypted packets have been captured with airodump-ng. This part of the aircrack-ng suite determines the WEP key using two fundamentalmethods. The first method is via the PTW approach (Pyshkin, Tews, Weinmann).
The mainadvantage of the PTW approach is that very few data packets are required to crack the WEPkey. The second method is the FMS/KoreK method. The FMS/KoreK method incorporates variousstatistical attacks to discover the WEP key and uses these in combination with bruteforcing.Additionally, the program offers a dictionary method for determining the WEP key. Forcracking WPA/WPA2 pre-shared keys, a wordlist (file or stdin) or an airolib-ng has to beused.OPTIONS -H, -helpShows the help screen.Common options: -a Force the attack mode, 1 or wep for WEP and 2 or wpa for WPA-PSK.-e Select the target network based on the ESSID. This option is also required for WPAcracking if the SSID is cloaked. For SSID containing special characters, see-ng.org/doku.php?id=faq#howtousespacesdoublequoteandsinglequoteetc.inapnames-b Select the target network based on the access point MAC address.-p Set this option to the number of CPUs to use (only available on SMP systems). Bydefault, it uses all available CPUs-q If set, no status information is displayed.-C Merges all those APs MAC (separated by a comma) into a virtual one.-l Write the key into a file.Static WEP cracking options: -c Search alpha-numeric characters only.-t Search binary coded decimal characters only.-h Search the numeric key for Fritz!BOX-d Specify mask of the key.
For example: A1:XX:CF-m Only keep the IVs coming from packets that match this MAC address. Alternatively,use -m ff:ff:ff:ff:ff:ff to use all and every IVs, regardless of the network (thisdisables ESSID and BSSID filtering).-n Specify the length of the key: 64 for 40-bit WEP, 128 for 104-bit WEP, etc., until512 bits of length. The default value is 128.-i Only keep the IVs that have this key index (1 to 4).
The default behaviour is toignore the key index in the packet, and use the IV regardless.-f By default, this parameter is set to 2. Use a higher value to increase thebruteforce level: cracking will take more time, but with a higher likelihood ofsuccess.-k There are 17 KoreK attacks. Sometimes one attack creates a huge false positive thatprevents the key from being found, even with lots of IVs. Try -k 1, -k 2.